USB Powered Desktop RFID Reader At 13.56MHz Multiple Protocols
TPAD10M is a multi-protocols desktop RFID reader which supports ISO15693, ISO18000-3mode3 and ISO14443A/B protocols. Also, it is an integrated reader with antenna together, which is also metal shielding design to support working normally in metal surrounding environment. Because of its metal package edge design, its misreading is cut down to less than 1cm.
Its wear-resisting surface makes it durable and ni even using for long time. USB communication interface is convenient to link with computer to control and this interface also supports the power to run the reader. There is a power switch at the short side of the reader, when not using, you could turn off the reader easily.
Support multi-protocols:ISO15693, ISO 14443A/V, ISO 18000-3M3 and NFC
NFC Forum Type 1: Innovision Topaz512 NFC Forum Type 2: Mifare Ultralight, Mifare Ultralight C, Mifare Ultralight EV1, NTAG21x. NFC Forum Type 3: Sony Felica [only support Polling] NFC Forum Type 4: Mifare DESFire EV1 NFC Forum Type 5: ICODE SLI ,ICODE SLIX ,ICODE SLIX2 ,Tag-it HF-I plus Mifare Classic Type: Mifare S50, Mifare S70 ,Mifare Mini ISO18000-3M3 Type: ICODE ILT ST ISO14443B Type: SRIX4K, SRI512, ST25TB512-AC
Reading range is different according to different protocols
Integrated design with reader and antenna
Metal shielding design to work normally even it is plad on the metal desktop
Support host and scan work mode (Setup through software)
Be capable of automatically turning off RF when at task idle
ISO15693, ISO 14443A/B, ISO 18000-3M3 and NFC
USB (Support VSP or HID)
Depends On Different Protocols
DC 5V (USB power supply)
Max Power Consumption
Metal Shielding Design
PCB and Metal Plate
RFID library management, RFID archive management, RFID jewelry management, RFID drug administration, RFID shop settlement, Self Service Kiosk, etc.